Uses for Dillon AP Dynamometers

The sturdy design of the Dillon AP mechanical Dynamometers allows for use a wide variety of environments. Any jobs with suspended weighing, tensioning support cables in construction, bridges, guy wires, field testing, chain, wire rope field testing, to name a few.

Specifications

• Accuracy: + 0.5% of capacity
• Temperature range: -50° to 140° F (-45° to 60° C)
• Ultimate Safety Factor:
  See table on cover for minimum USF
• Construction:
  • Pressure bar –
    • Aircraft quality E4340 steel or 7075-T651 aluminum
  • Shackles –
    • A4140 forged steel (machined from E4340 steel)
  • Shackle pins –
    • Machined from E4340 steel
• Case housing:
  5” models are equipped with high strength composite plastic case.
  10” models use cast aluminum enclosure.
• Corrosion protection: Pressure bar protected with durable powder coat paint. Shackles and pins are electroless nickel plated. All integral machining and fasteners are produced from noncorrosive materials or have suitable plating.
• Zero control: Zero up to 20% of capacity. Zeroed load must be considered as part of ultimate load.
• Calibration: Traceable to NIST.
• Documentation: Includes User’s Guide and signed calibration card.
• Carry case/crate:
  Low/Med capacity 5″ dial – includes plastic carry case
  Low/Med capacity 10″ dial – optional steel carry case
  All high capacity – includes reinforced plywood crate
• Periodic proof loads: Controlled 150% proof loads permitted annually.
•  

Muncy™ Industries, your best choice to acquire Dillon dynamometers.